HT HRC FUSES :

AVT Fuse:

AVT Fuse: 
Avt series Fuses offer protection solution to potential transformers from any nature of fault.
Range : Kv - 2.5 to 36 Amps: 0.5 to 6

NGT Fuse

NGT Fuse: 
NGT Series comply with DIN-43625. They are used for general circuit protection. Also fuses suitable for motor protection could be offered in the same dimensions
Range: Kv - 3.6 to 36 Amps: 4 to 500

BHT Fuse

BHT Fuse: 
BHT Series fuses are suitable for use in oil and the same can be used for outdoor applications. 
Range: Kv - 3.6 to 24 Amps: 250(max)

C-1/C-0 Fuse

C-1/C-0 Fuse:
C-1/C-0 Series are generally used for capacitor protection. Fuses suitable for motor protection can also be offered in the same dimensions.
Range: C-1: 3.6/7.2Kv, 250A(max) C-0: 12Kv, 200A(max)

RGT Fuse

RGT Fuse:
with TA3 tag arrangement and are used in RMU's and transformer backup protection.
Range: 12Kv, 160A(max)

RGTT Fuse

RGTT Fuse:
RGTT Series are designed for longer length motor starting applications to withstand surges due to frequent starting of motor.

NGTT Fuse

NGTT Fuse:
NGTT Series are designed for motor starting applications to withstand surges due to frequent starting of motor.

2XRGTT Fuse

2XRGTT Fuse:
2XRGTT Series are heavy duty double barrel fuses suitable for transformer backup protection.
Range: Kv - 3.3 to 24 Amps: 400 & 630

LOAD BREAK SWITCHES :

LOAD BREAK SWITCHES

ON LOAD SWITCH:

AMP-SYS
switchboard consists of a standardized, modular and compact series of protected panels, equipped with air-operated on-load switches and SF6 circuit breakers.
The typical arrangement of standard panels will enable to fulfill different applications in the medium voltage distribution systems (both in 12Kv and 24Kv class) with utmost compactness, safety and reliability.

Salient features:
*
Reduced dimensions : The panels are suitable for installation also in small rooms, so as prefabricated metallic or concrete substations. The switch board can be placed against the wall, as all operations and inspections can be performed from the frontal face.
*
Extensibility : It can be extensible without limitations in both directions at site.
*
Personal safety : Designed to resist any severe arcing and to provide the best safety measures by the incorporation of an advanced interlocking system.

Dimension of the main typical panels: * Length (mm): 500-750  * Width (mm): 900-1000   * Height (mm): 1950

Standards: "AMP-SYS" switch boards are manufactured in compliance : IEC 60298
On-Load and Off-Load switches are manufactured in compliance : IEC 60265

............................................................................................................................................................................................................................

SEMICONDUCTOR APPLICATION FUSES :

BS TYPE:

BS TYPE:
 

BS type series are fast acting and high speed fuses designed to offer protection to semiconductor devices such as diodes and thyristors.

BNH TYPE:

BNH TYPE:
 

BNH type fuses are with knife edge arrangements suitable for general and industrial applications.
Range: 415V/660V, 2A to 800A

FERRULE TYPE:

FERRULE TYPE:
 

These are cylindrical fuses suitable for semiconductor protection application and they are available in different sizes. 5x20, 10x36, 14x51, 22x58, 27x60

NORTH AMERICAN TYPE:

NORTH AMERICAN TYPE:
 

North American type fuses are of North American Pattern and are used for various circuit protection applications

LT HRC FUSES :

BS TYPE:
 

BS type fuses are with bolt fixing arrangements suitable for general and industrial applications.
Range: 415V/660V, 2A to 800A

BNH TYPE:
 

BNH type fuses are with knife edge arrangements suitable for general and industrial applications.
Range: 415V/660V, 2A to 800A

FERRULE TYPE:
These are cylindrical fuses suitable for general circuit protection and they are available in different sizes. 5x20, 10x36, 14x51, 22x58, 27x60
 

Designed & Hosted by : MID  Promoted by : GID